Fortinet 548B - Manual (Page 284)

- 284 -
7.11.2.5 voice vlan data priority
Use this command to either trust or entrust the data traffic arriving one the Voice VLAN port.
Syntax
voice vlan data priority untrust | trust
Default Setting
trust
Command Mode
Interface Config
7.12 LLDP (Link Layer Discovery Protocol) Commands
7.12.1 Show Commands
7.12.1.1 show lldp
This command uses to display a summary of the current LLDP configuration.
Syntax
show lldp
Default Setting
None
Command Mode
Privileged Exec
Display Message
Transmit Interval: Shows how frequently the system transmits local data LLDPDUs, in seconds.
Transmit Hold Multiplier: Shows the multiplier on the transmit interval that sets the TTL in local
data LLDPDUs.
Re-initialization Delay: Shows the delay before re-initialization, in seconds.
Notification Interval: Shows how frequently the system sends remote data change notifications, in
seconds.