Fortinet 548B User Manual

Page 651

Text mode
Original mode

- 651 -

11.2.6.6 Configuring Double VLAN Tunneling Function Page

Selection Criteria

Slot/Port - Select the physical interface for which you want to display or configure data.

Configurable Data

Interface Mode - This specifies the administrative mode via which Double VLAN Tagging can be
enabled or disabled. The default value for this is Disabled.

Interface EtherType - The two-byte hex EtherType to be used as the first 16 bits of the DVlan tag.



802.1Q Tag - Commonly used tag representing 0x8100



vMAN Tag - Commonly used tag representing 0x88A8



Custom Tag - Configure the EtherType in any range from (0 to 65535)

Command Buttons

Submit - Update the switch with the values on this screen. If you want the switch to retain the new
values across a power cycle, you must perform a save.