Fortinet 548B - Manual (Page 860)

- 860 -
Maximum Number of HTTPS Sessions - This field is used to set the maximum allowable number
of HTTPS sessions. The value must be in the range of (0 to 16). The default value is 16. The
currently configured value is shown when the web page is displayed.
Non-Configurable Data
Certificate Present? - Displays whether there is a certificate present on the device.
Certificate Generation Status - Displays whether SSL certificate generation is in progress.
Command Buttons
Submit - Send the updated screen to the switch. Changes take effect on the switch but these
changes will not be retained across a power cycle unless a save is performed.
Download Certificates - Link to the File Transfer page for the SSL Certificate download. Note that
to download SSL Certificate files SSL must be administratively disabled.
Generate Certificate - Begin generating the Certificate. Note that to generate SSL Certificate files
SSL must be administratively disabled.
Delete - Used to delete the corresponding certificate, if it is present.
11.5.6 Defining Secure Shell Configuration
11.5.6.1 Configuring Secure Shell Configuration Page
Selection Criteria
Admin Mode - This select field is used to Enable or Disable the administrative mode of SSH. The
currently configured value is shown when the web page is displayed. The default value is Disable.
SSH Version 1 - This select field is used to Enable or Disable Protocol Level 1 for SSH. The
currently configured value is shown when the web page is displayed. The default value is Enable.
SSH Version 2 - This select field is used to Enable or Disable Protocol Level 2 for SSH. The
currently configured value is shown when the web page is displayed. The default value is Enable.
Maximum Number of SSH Sessions Allowed - This select field is used to configure the maximum
number of inbound SSH sessions allowed on the switch. The currently configured value is shown
when the web page is displayed. The range of acceptable values for this field is (0-5).