Fortinet 548B - Manual (Page 678)

- 678 -
Selection Criteria
IPv4 Address - Select the way "IPv4 Address" to trace.
Host Name - Select the way "host name" to trace.
Host Name V6 - Select the way "Host Name V6" to trace.
IPv6 Address - Select the way "IPv6 Address" to trace.
Configurable Data
IP Address - Enter the IP address of the station you want the switch to discover path. The initial
value is blank. The IP Address you enter is not retained across a power cycle.
Probes Per Hop - Enter the number of probes per hop. The initial value is default. The Probes per
Hop you enter is not retained across a power cycle.
MaxTTL - Enter the maximum TTL for the destination. The initial value is default value. The MaxTTL
you enter is not retained across a power cycle.
InitTTL - Enter the initial TTL to be used. The initial value is default value. The InitTTL you enter is
not retained across a power cycle.
MaxFail - Enter the maximum Failures allowed in the session. The initial value is default value. The
MaxFail you enter is not retained across a power cycle.
Interval - Enter the Time between probes in seconds. The initial value is default value. The Interval
you enter is not retained across a power cycle.
Traceroute - Display the result of traceroute.
Command Buttons
Submit - This will initiate the traceroute.