Fortinet 548B - Manual (Page 502)

- 502 -
Source Filter Mode: The source filter mode (Include/Exclude) for the specified group on this
interface. This
is “-----” for IGMPv1 and IGMPv2 Membership Reports.
Source Hosts: This displays the list of unicast source IP Addresses in the group record of the
IGMPv3 Membership Report with the specified multicast group IP Address. This i
s “-----” for IGMPv1
and IGMPv2 Membership Reports.
Expiry Time: This displays the amount of time remaining to remove this entry before it is aged out.
This is “- ----” for IGMPv1 and IGMPv2 Membership Reports.
9.2.1.5 show ip igmp interface stats
This command displays the IGMP statistical information for the given interface. The statistics are only
displayed when the interface is enabled for IGMP.
Syntax
show ip igmp interface stats
- Valid slot and port number separated by forward slashes.
Default Setting
None
Command Mode
Privileged Exec
User EXEC
Display Message
Querier Status: This field indicates the status of the IGMP router, whether it is running in Querier
mode or Non-Querier mode.
Querier IP Address: This field displays the IP Address of the IGMP Querier on the IP subnet to
which this interface is attached.
Querier Up Time: This field indicates the time since the interface Querier was last changed.
Querier Expiry Time: This field displays the amount of time remaining before the Other Querier
Present Timer expires. If the local system is the querier, the value of this object is
zero.
Wrong Version Queries: This field indicates the number of queries received whose IGMP version
does not match the IGMP version of the interface.
Number of Joins: This field displays the number of times a group membership has been added on
this interface.
Number of Groups: This field indicates the current number of membership entries for this interface.