Fortinet 548B - Manual (Page 183)

- 183 -
Syntax
ip javamode
no ip javamode
no - This command disallows access to the Java applet in the header frame of the Web interface.
When access is disabled, the user cannot view the Java applet.
Default Setting
Enabled
Command Mode
Global Config
7.3.7.3 ip http port
This command is used to set the http port where port can be 1-65535 and the default is port 80.
Syntax
ip http port <1-65535>
no ip http port
<1-65535> - HTTP Port value.
no - This command is used to reset the http port to the default value.
Default Setting
80
Command Mode
Global Config
7.3.7.4 ip http server
This command enables access to the switch through the Web interface. When access is enabled, the
user can login to the switch from the Web interface. When access is disabled, the user cannot login to
the switch's Web server.
Disabling the Web interface takes effect immediately. All interfaces are affected.