Fortinet 548B User Manual

Page 844

- 844 -

"Held"

"ForceAuthorized"

"ForceUnauthorized".

Backend State - This field displays the current state of the backend authentication state machine.
Possible values are:

"Request"

"Response"

"Success"

"Fail"

"Timeout"

"Initialize"

"Idle"

VLAN Assigned - Displays the VLAN ID assigned to the selected interface by the Authenticator.
Note: This field is displayed only when the port control mode of the selected interface is not
MAC-based.

VLAN Assigned Reason - Displays the reason for the VLAN ID assigned by the authenticator to the
selected interface. Possible values are:



Radius



Unauth



Default



Not Assigned

Maximum Users - Displays the maximum number of clients that can get authenticated on the port in
the MAC-based dot1x authentication mode. This field is configurable. The maximum users value is in
range of 1 to 16.

Unauthenticated VLAN ID - Displays the Unauthenticated VLAN ID for the selected port. The valid
range is 0 to 3965.

Session Timeout - Displays the Session Timeout set by the RADIUS Server for the selected port.
Note: This field is displayed only when the port control mode of the selected port is not MAC-based.

Session Termination Action - Displays the Termination Action set by the RADIUS Server for the
selected port. Possible values are:



Default



Reauthenticate

If the termination action is Default then, at the end of the session, the client details are initialized.
Otherwise, re-authentication is attempted. Note: This field is displayed only when the port control
mode of the selected port is not MAC-based.

Command Buttons

Refresh - Update the information on the page.