Interlogix VEREX Director - Manual (Page 88)

80 Verex Director V4.9.1 User's Guide 21-0381E v4.9.1
Screen Reference
-Panel (bottom of the form): This is where you
select a desired panel (for systems with more
than one).
Alternative: You can also set the 'tree' to list status
topics on a panel-by-panel basis. For details, refer
to "Other Desktop Choices".
Anti-Passback
- [Anti-Passback Reset]: This opens a small
screen that allows resetting the antipassback
status for a single user, or all users for doors
associated with selected panel(s).
-User: This allows selecting a specific user, or
"All Users" to have their antipassback status
reset at the selected panel(s).
Anti-Passback Settings
These choices allow you to select the panels
associated with the user APB status-reset (for
systems that have more than one panel). (If you
have only one panel, these settings all have the
same effect.)
- All Panels in this Account: This will reset
the antipassback status for all panels in your
presently-selected account.
- All Panels in this Panel Group: This will
reset the antipassback status for your
selected panel, plus any others that
communicate through the same cable or
remote modem.
- Just this Panel: This will reset the
antipassback status for your selected panel
only.
Control & Status Panel Control & Status

System (Antipassback)
Control & Status Panel Control & Status

System [Anti-Passback Reset]