Interlogix VEREX Director - Manual (Page 70)

62 Verex Director V4.9.1 User's Guide 21-0381E v4.9.1
Setting the Maximum Camera-
Image Size
Camera-images auto-size relative to
the window they are displayed in.
Exception: To avoid jagged looking
images, you can set the maximum
displayed image-size for each
camera.
Steps:
1) Open the 'View' that contains the
desired camera-image.
MyTools Bar: Visual Director (+User login if
prompted). Tree: Control & Status, Panel
Control & Status (+User login if prompted),

Visual Director.
Then, select from the 'Views' toolbar (top-right).
2) Open the video toolbar by clicking the
button in the bottom-left corner of the
camera-image. Then, click the 2nd button
("Change View Size").
3) Click the down-arrow on the right to open
the list and make your selection.
For more information, refer to the item-
descriptions for this screen.
Screen Reference
- This screen allows setting the maximum
displayed image-size for the camera being
viewed.
- X: This closes the image-size control, and
returns you to the camera-image.
