Interlogix VEREX Director - Manual (Page 228)

220 Verex Director V4.9.1 User's Guide 21-0381E v4.9.1
STU and VBUS outputs--plus the two on the
panel itself for a grand total.
This is selectable as multiples of 4 only (4, 8,
12, etc), so select the next higher value if
necessary.
Attention: VBUS and STU outputs will NOT
be recognized if the panel onboard outputs
value does not account for all of these outputs
as described here.
Intrusion Settings for a Panel
( V4.4)
The System Intrusion screen
This screen provides access to various
intrusion settings that pertain to a specific
panel.
Tip: You can also use the Configuration Wizard to set
up a new system. (Look in the Tools menu).
How to Get Here
Multi-Account Systems: First select [Account Folders]
in the 'tree', and locate and double-click the desired
account.
MyTools Bar: System – Intrusion
In the Tree: Configuration
(click the "+") ,
 System, Intrusion (Under the specific panel
group and panel--if listed in the 'tree'.) Related
Topic: "Other Desktop Choices"
Tip: The Grid / Form toolbar-button allows selecting
your preferred view-mode (forms view is recommended
here).
Things You Can Do
View or change settings as desired for the
specific panel (see the selection-descriptions).