Interlogix VEREX Director - Manual (Page 49)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 41
Screen Reference
- Vertical Slider bar on the right: This
indicates your relative position within
the recorded video during playback.
For recordings associated with a video
event, a dark band will show when the
triggering event occurred within the
recording.
Tip: This is used as the default starting
location for playback.
- (Play Previous Clip): Plays
the video recording saved immediately
prior to the present one (at the
NetVision PC
).
- (Play): Starts or
continues playing the present (I.e.,
displayed) video clip.
- (Fast-Forward Play): Causes
the present video to play at double-
speed.
- (Pause): Stops a playing video,
while remembering your present
location in the video.
- (Stop): Stops playing the
present video and disregards your present
location. (Clicking play will restart the video at
the time of the triggering event (if applicable), or
otherwise at the beginning of the file.
- (Play Next Clip): Plays the video
recording saved immediately after the present
one (at the NetVision PC
).
- (Save As): Allows downloading and saving
the displayed video-clip to any location that is
accessible through your PC.
Tip: If this action fails, check to ensure that all
requirements are being met, and everything is set up
correctly. (You may also need to enlist the help of
your network administrator.)
Related: "Setting up Video Events".
- [ Close ] : Closes the video viewer.
(Click the Camera Symbol for a Video-Event Alarm
Message)