Screen reference – Interlogix VEREX Director User Manual
Page 115

21-0381E v4.9.1
Welcome Report
Control
Admin Sys
Config Tech-Ref
107
Status of Monitored Sensors
(Input Points)
The 'point' status screen shows the status of
monitored sensors, and lets you bypass a
faulty sensor to allow arming an area.
Permissions/Authorities: This feature can be used by
operators with "Control and Status" permission, when
they log into 'Control & Status' as a user with the
authority to bypass input points.
Also See (
V4.0):
+ Visual Status and Control (Maps and Cameras)
+ To connect: "New Installation? Try the Wizard"
Initiate a Connection, and Access
this Topic
See if you're already connected with the
panel(s) by checking the status bar at the
bottom of the monitoring window.
Multi-Account Systems: First select [Account
Folders] in the 'tree', and double-click the desired
account.
If not presently connected, initiate a connection
with the desired panel(s).
For details, refer to "Connecting to the Associated
Panel(s), An Overview" (under "Checking Status &
Controlling Items", previous).
-------------------------
Then, select
Control & Status - Points
from
the MyTools bar, or select
Points
under
"Control & Status" in the 'tree'.
Using the Tree: Click your site/account button in the
tree, and open Control & Status, and Panel Control &
Status (click the "+" beside each topic).
Login with your user ID and PIN if prompted for
this.
Panel Groups and Panels: Open your specific panel
group and panel if these are listed in the 'tree'. Tip:
The 'tree' can be set to show Control & Status topics in
a single list (logical tree view), or on a panel-by-panel
basis. For details, refer to "Other Desktop Choices".
If the status screen is blank or inactive (or if you'd like
more information), refer to "Accessing the Control and
Status Topics for a Panel" (under "Checking Status &
Controlling Items", previous).
Viewing the Status of a Specific Sensor
Use the
Grid
/
Form
toolbar-button to select
your preferred view-mode.
Forms view: Details for one sensor at a time;
Grid View: All defined sensors in a list.
Select a desired sensor (input-point) in the list.
Tip: In 'forms' view, you can select an item at the
bottom of the form, or use the 'Find' and 'Find Next'
buttons (binoculars) to search by name (or 1st few
characters--e.g., nam*).
Then, refer to the selection-descriptions for this
screen while viewing the status topics for the
desired input point(s).
Tip: Active status items, and available button(s) are
displayed in color. Be sure to dispatch someone to
deal with any conditions that require attention.
Bypassing a Specific Input-Point
To bypass a specific input-point, allowing its
area to be armed, or remove a 'bypass',
allowing the sensor to be monitored:
Select the desired input-point (bottom of the
'forms' window);
Click
[Bypass]
or
[Remove Bypass]
as
applicable;
If the button is not present, this means either that the
input-point is not of a 'bypassable' type, or you do not
the authority to bypass input-points.
A user's authorities can be set to automatically remove
any 'bypasses' that are in effect when they enter an
area (to help ensure that any faulty sensors are not
forgotten). For details, refer to the "Auto Remove
Bypass" setting under "Authorities for Users/Entrants".
Screen Reference
Checking Status or Bypassing Input Points (Sensors)