Interlogix VEREX Director - Manual (Page 87)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 79
Antipassback (APB): A feature that blocks individual
cards from being used to:
+ Re-enter the same area, or;
+ Re-enter the facility from 'outside', and/or;
+ (Optional): Enter other areas;
…Unless they are recorded as exiting first--i.e., each
person must use their card/token at every reader they
encounter (that is set to "Detect Antipassback"). Tip:
This helps to protect against unauthorized card usage.
Enabling the Antipassback Feature: To enable
antipassback tracking for specific areas and doors,
refer to the "Antipassback" selections under "Areas and
Related Settings", and the "Detect Antipassback"
selection under "Reader 1 & 2 Settings for a Door".
Antipassback Reset
From time-to-time, a person may be unable to
enter a door due to an antipassback violation
(such as if they entered or exited when the
system unlocked a door for someone else).
This can be corrected by resetting the
antipassback status for the specific user, or all
users, as desired.
Reset APB Status by Area: You can also reset user
antipassback status on an area-by-area basis. For
details, refer to "Checking Status or Controlling Items
by Area" (in a following section).
Resetting Antipassback Status
Initiate a connection with the panel(s), and
access the "
System " Control & Status topic as
described previously/above.
Multi-Panel Systems: Select the desired panel at the
bottom of the form (if not shown/selected in the 'tree').
If the status screen is blank or inactive (or if you'd like
more information), refer to "Accessing the Control and
Status Topics for a Panel" (under "Checking Status &
Controlling Items", previous).
Then, click [Anti-Passback Reset] . In the
next screen, select an individual user, or "All
Users", and the panel(s) to be affected by the
reset (i.e., the ones associated with the
specific areas and doors).
When finished, click
OK , and respond to any
additional messages that appear.
Resetting Users' Antipassback Status