Interlogix VEREX Director - Manual (Page 142)

134 Verex Director V4.9.1 User's Guide 21-0381E v4.9.1
Assigning Scheduled Event
Filters to Operators
Once the "Scheduled Event Filters"
have been set up, go to the
Operator
screen, and ensure one is assigned
to each operator, as desired.
Related Topic(s): See the section on
"Operators", previous.
Screen Reference
Pick-List (bottom of the form)
- Scheduled Event Filter: This is
where you select a "Scheduled Event
Filter" to view or edit. This area shows
the name of each filter/profile, once
defined.
Top of the Form
- Name: Enter a suitable name/description for
the scheduled filter profile here.
- Account: This is the account that this event
filter will be used with (allows the software to
display the correct device names, etc. in the
selections that follow). Click
[...] to change this
setting.
Note: Scheduled event filters are intended for use
with individual accounts. If the operator logs into a
different account, filtering selections that pertain to
specific items (areas, doors, etc.) will apply to the
items at the same ID number in that account.
In Window Filter 
This pertains to event filtering for associated operators
during the times set under
Schedule .
- Sort Order By: This allows listing messages in
order by date/time only, or showing 'unresolved'
(and higher priority) events first.
-------------------------
-
[Clear Filter]: Removes all filters--i.e., returns
to the factory settings (and closes the 'filter'
window).
- Filter on Resolution: This lets you have the list
include events depending on whether or not
they have been 'resolved' (i.e., dealt-with).
All: This shows all events--including ones not
associated with the comment/resolution feature (i.e.,
not set as 'resolvable').
- Filter on Priority: This allows limiting the
window to show only events of a desired priority
value (or range).
- Filter on Custom Filter: This allows limiting the
window to show only events of a desired
'custom-filter' value (or range).
Also See: To assign priorities, 'Custom Filter' values,
and other parameters, refer to the configuration topic:
"Customizing How Events are Displayed".
- Filter on Area, Door, etc: For events pertaining
to a specific person or door, etc., select the
desired item(s) here.
Out of Window Filter 
This pertains to event filtering for associated operators
outside of the times set under
Schedule .
For details on the various selections, refer to
Scheduled Filter , previous/above.
Schedule 
- Days of the Week (with Associated Time-
Intervals): The days of the week showing the
time intervals for each day. (To add an
interval, right-click the specific day. To adjust
an interval, drag the interval and/or its end-
points to the desired position.)
Tips: You can copy and paste (or delete) time
intervals using the right-click menu. Up to 6 unique
time-intervals can be applied as desired throughout
the weekdays in the schedule for each filter profile.
Work Shift that Spans Midnight: In this case, each
day will need two intervals to cover the times before
and after midnight.
Management Operator Scheduled Event Filter