System-wide capacities – Interlogix VEREX Director User Manual
Page 350
342
Verex Director V4.9.1 User's Guide
21-0381E v4.9.1
-- +1 / +5 DVRs
1 - 1023 ‡
1 - 1023 ‡
March Networks DVRs
-- +1 / +5 R5 DVRs
-- R4 DVRs (unlimited)
(
V4.7)
1 - 1023
‡
‡
(
V4.7)
1 - 1023
‡
‡
Notes and Exceptions: ‡ Optional via licensing; § For new systems / updated hasp key only;
* To support doors/access-control and/or 'memory model'
4, xL panels (narrow mainboard) require a feature
expansion board;
Client/Server operation also allows multi-server login; Adding panels allows for more areas,
sensors, doors, etc.;
Elevator (lift) capacity is shared with the door capacity; Floor capacity is the same per panel
or account (124), and can be for one building, or shared across multiple buildings;
Suite capacity is per panel, and
is reduced by 5 for each (other type of) hardware module present.
Note: Playback for video events is NOT supported for March R4 DVRs.
Converted TDC/PDC Door Controllers: Up to 10 per panel (combined total). The above lists show only the items that
are different between the two system versions. The sections that follow describe the overall maximum system
capacities. * Support for suite-security keypads requires a "Feature-Set" selection of 5 or higher. To set this value,
refer to "Account-Wide Panel Settings".
System-Wide Capacities
Client / Server Operation:
This is dependant
upon your software licensing (as managed
through the license-manager software).
No. of Client Workstations and/or Panel-
Connection Ports:
These items are limited
only by the licensing agreement, but subject to
network performance, and system size /
activity.
Operators:
Not limited (subject only to hard-
drive space).
Message Log Capacity (V4.7x):
The
following number of messages are supported:
Related Topics: Removing old Activity or Audit Logs
(Purge)
Saved Reports:
Not limited (subject only to
hard-drive space).
Account Capacities
Panels and Connections:
Number of panels
per account is limited by the software
licensing, and is also subject to PC and
network performance. Up to 30 panels at a
time can be connected together to share a
single connection to a PC or modem. The
number of panel connection ports is limited by
licensing, port/modem availability, and PC
performance.
Notes / Exceptions:
The "Prime" version of the VEREX Director software
('feature set' 1, 2, 3, and 4) is limited to 1 panel per
account.
Automatic dial-in to transmit messages to
the VEREX Director system is not supported
through a shared connection (a modem is
needed for each remote panel).
Remote management through the panel's
built-in Bell 103 (300 baud) modem/dialler is
limited to 'feature set' 1 – 3 (one panel / up to
300 users per account).
Users:
Same as the 'per panel' capacity (see
the next table).
Card No./IDs vs. Firmware: Beginning with V3.2 panel
firmware, 32-bit ("9.5 digit") card numbers are
supported (previously 7 digits). This also requires
V1.5 door/elevator controller firmware. With panel
firmware V3.2, card IDs can be up to 999999999. With
firmware
V3.31, card numbers can be up to
4294967295.
Authorities:
Same as the 'per panel' capacity
(see the next table).
Message
Type
Typical (SQL
Server
Express)
SQL Server
Inst. Option
After Auto-
Purge
Alarm/event
messages
1,000,000 20,000,000
Minus
5%
Communi-
cations logs
50,000 50,000
Minus
10%
Operator logs
240,000
240,000
Minus 10%