Interlogix VEREX Director - Manual (Page 173)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 165
Default Password
This software includes a default operator
password that should be changed right away
to ensure only authorized persons will be able
to access the system.
Default Operator Name & Password: Operator, 1234
Changing the default operator
password
 Log in as the default operator;
 Open the File menu, and select Change
Password ;
 Enter the new password, press Tab , and
enter the password again.
 When finished, press Enter once again (or
click Ok ).
Be sure to select a password that will be easy for you to
remember.
Default Service PIN
Similarly, each account will have a default
service PIN that allows a service technician to
perform various tasks through a system
keypad. This should be changed for each
account, and updated to the specific panels.
Changing the Default Service PIN for an
Account
 Log in as the default operator (or anyone
with permission to change the service PIN);
 Select Account Information from the
MyTools bar, or click your site/account
button in the tree, and select
Account
Information .
 Select the " Service PIN " tab.
Multi-Account Systems: First select
[Account Folders] in the 'tree', and
double-click the desired account.
 Click [Change Service PIN] on the form.
 Enter the new service PIN, press Tab , and
enter the PIN again.
 When finished, press Enter once again (or
click Ok ).
Tip: Select a service PIN that will be easy for you to
remember, and be sure to make any service
technicians for the specific accounts aware of this
change.
For details on updating the panel(s) with the
new service PIN, refer to "Panel
Communications and Updates".
System Maintenance Tasks
Password and Personal ID Number (PIN) Issues