Interlogix VEREX Director - Manual (Page 208)

200 Verex Director V4.9.1 User's Guide 21-0381E v4.9.1
Account Information: (technical
settings)
These screens allow setting the
site/account name (to appear in the
'tree'), plus various technical system-
wide parameters. These include the
"Feature Set", which determines the
system capacities for the account.
"Account-type" selections determine
the items (fields) to appear on-screen.
Note: Which 'Feature Sets' are supported
(and associated capacities) is based on the
software licensing, which is managed
through the 'activation key' on the PC that
contains the software database (
V4: USB
connector; V3.3.2: Parallel/printer port;
V3.3.3: Either).
Viewing or Entering These Settings
Select Account Information from the MyTools
bar, or click your site/account button in the
tree, and select
Account Information .
Multi-Account Systems: First select [Account
Folders] in the 'tree', and double-click the desired
account.
Now, refer to the selection-descriptions for
these screens while viewing or entering your
desired settings.
Tip: You can use the Grid / Form toolbar-button to
select your preferred screen format (Forms view is
recommended here).
Screen Reference
 Standard 
- Account Name: A name/description for the
site/account.
Tip: This also appears in the 'tree' area.
Account Type
-Intrusion: Systems with monitored sensors, but
no access-controlled doors;
-Access: Systems with access-controlled doors,
but no monitored sensors or 'Areas';
-Intrusion and Access: Systems with both
access-controlled doors and monitored sensors.
-------------------------
-Central Station: Select this if any panel(s) will
be monitored through a central monitoring
facility;
-Suite Security: Systems that include
apartments / facilities being monitored by suite-
security keypads (2-zone or 8-zone);
-LCD Keypads: Systems with any LCD keypad
modules;
-Elevator: Systems with access-controlled
elevators (lifts) and floors.
Panel Mode Information
- Panel Operating Mode: This sets the basic
operating parameters and/or default settings for
the panel (allowing one firmware build to be
used world-wide).
UK/ACPO (DD243): With UK/ACPO operation, the
modem/dialler may not be available (i.e., older style
main board with built-in bell 103 modem).
Additional Regions: These selections typically apply
suitable default settings for the specific region.
Changing the Operating Mode: With Director
v4.4,
the panel operating mode is set initially through the
new account wizard. At that time, some default
items/values are set up automatically. If you need to
change the panel operating mode, and wish to obtain
suitable default values, it is best to set up a new
account and delete the old one.
- Language Set: Future Use. This determines
the languages to be supported at LCD keypads.
(The languages will be listed on-screen.)
Account-Wide Panel Settings
(Feature-Set, Service PIN, etc.)
Account Information