Interlogix VEREX Director User Manual
Page 168

160
Verex Director V4.9.1 User's Guide
21-0381E v4.9.1
Number' without the asterisks.
Magstripe Encoding (card-access vs. other uses):
1) Refer to [Card Printer Encoder Setup],
previous/above;
2) Go to Edit Card Encoding;
3) Select the 'track' (Track 2 is typical/common);
4) Select the desired item:
For magstripe access cards: *Card Number*
(with
asterisks);
For other uses: Desired item
(e.g.,
'Card
Number');
5) [Add Field], [OK].
Card-Badging Update for Language Support
(v4.62)
Previously, cards could only be printed by an operator
of the same language as the one who created the
badge layout. This has been fixed in Director v4.62 by
adding numeric references to the end of field names
as used by the card badging software.
Any existing card layouts will still print in the original
language (see notes).
If you want operators of different languages to be able
to print cards, you will need to:
Upgrade to Director v4.62 (see notes);
Update all card layouts (or create new ones) using
ONLY the new-style field names.
Notes: This feature is partially supported in Director
v4.61. If using custom user fields, you'll need v4.62.
To allow printing for any language, card layouts
containing custom user fields with an underscore "_" in
the field name must be updated using the new-style
field names.