Interlogix VEREX Director - Manual (Page 273)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 265
Screen Reference
Pick-Lists (Bottom of the Form)
-Panel Group & Panel references (optional; bottom
of the form): This is where you select a specific
panel-group and panel in a multi-panel system
where the 'tree' is not set to show items on a panel-
by-panel basis. For more information on this
feature, refer to "Other Desktop Choices".
- Input Point (bottom of form): This is where you
select an input-point to view or edit. This area
shows a reference number assigned by the
system, and the name of the selected 'input',
once defined;
The input-point numbers are assigned by the system
when a module (POD) that supports input points is set
up. The number assigned to each input-point is based
on the module installation order, and the number of
input-points supported by (reserved for) each module.
Tip: The "Module" and "Range" settings show the
device associated with the input-point, and the range
of input-points for that device.
"Offset" values for each panel determine whether
multi-panel sites will have consecutive versus
repeating input-point-numbers. For details, refer to
the "Display Offsets" value under "System Panels and
Displayed Item-Numbers".
Top of the Form
- Name: A suitable description for the input point
indicating its location and/or usage, etc.
Configuration Input Points