Interlogix VEREX Director - Manual (Page 26)

18 Verex Director V4.9.1 User's Guide 21-0381E v4.9.1
In/Out Status Tracking: This feature
requires "User In/Out Status Tracking" to be
enabled.
Related Setting:
YourAccount,  Account
Information, Setup (tab), "Enable User
In/Out Status for this Account"
An instant roll-call feature has been
added to the status toolbar.
This sends a roll-call report for your
monitored account to your default Windows
printer.
(The report will list persons on an area-by-
area basis.)
Note: A communications session with the
applicable panel(s) must be in effect.
To start a communications session:
1) Select Communications from your MyTools bar, or
click [Communications] in the 'tree', and select
Pending/OnLine. 2) Click [Edit], and make your
selections from the screen that appears.
Tip: Once there, you can open the online help at the
applicable topic by pressing F1.
To set or change the account to be monitored:
1) Click [Monitor] near the far-right end of the toolbar;
2) Make your selections from the screen that appears.
To select a default printer under MS Windows:
1) Go to your Windows "Control Panel"; 2) Double-click
"Printers and Faxes"; 3) Double-click the desired
printer.
As well, "Time and Attendance - Roll-Call"
reports can now be run on individual areas.
Roll-Call Reports (v4.61)