Interlogix VEREX Director - Manual (Page 333)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 325
Settings , Control Panel , and Phone and
Modem Options .
3) Select the "Modems" tab, and click [Add] .
4) Select "Do not detect...", and click [Next] .
5) Under "Standard Modem Types", select
"Communications Cable between two
computers", and click
[Next] .
6) Select the serial port (COMx) that the cable
will be using, and click [Next] .
7) Click [Finish] .
8) In the next screen, click [OK] to close the
screen. Note: The name of the direct-cable-
connection will be set as "Communications Cable
between two computers"
.
Also See (Related Topics):
"New Installation? Try the Wizard!"
"Panel Connection Overview"
" Setting Up a New System (Commissioning)"
"Panel Communications and Updates