Screen reference, Setting or changing an operator's password – Interlogix VEREX Director User Manual
Page 136

128
Verex Director V4.9.1 User's Guide
21-0381E v4.9.1
Quickly Changing Your Password
Open the
File
menu, and select
Change
Password
. Then, enter the new password,
press
Tab
, enter the password a second time,
and press
Enter
(or click
OK
).
Changing the Password for any
Operator
Select
Operator
from your MyTools bar, or
click
[Management]
in the 'tree', open the
Operator
branch, and select
Operator.
Then, use the
Grid
/
Form
toolbar-button to
select your preferred view-mode.
In 'Forms' view, select the desired operator at
the bottom of the window.
Tip: You can also use
the 'Find' and 'Find Next' buttons (binoculars) to search
by name (or 1
st
few characters--e.g., nam*).
(In Grid view, locate the desired operator in the list.)
Now, click the
[
... ]
next to "Password". When
the next screen appears, enter the new
password, press
Tab
, enter the password
again, and press
Enter
(or click
OK
).
If the desired operator is not listed, this means you do
not have the authority to change their password.
Screen Reference
- Password: The desired/new password for the
operator.
- Re-enter Password: Enter the same password
again (this helps protect against typing errors).
- [Ok]: Confirms the new password.
- [Cancel]: Aborts the password-change (keeps
the previous one).
Be sure to select a memorable password, and/or have
the operator change it again to something they will
remember.
Setting or Changing an Operator's Password