Screen reference – Interlogix VEREX Director User Manual
Page 205

21-0381E v4.9.1
Welcome Report Control Admin
Sys Config
Tech-Ref
197
3B: Setting up Shared Holidays
(and/or Time-Change Dates)
Once the related "Community
Groups" have been set up
(previous/above), you can set up
shared holidays the same as for
individual accounts, with the following
exceptions:
Shared holidays are initially defined
under "[ Account Folders ]
Shared
Groups
";
(NOT under "Holidays" for a specific account.)
Shared holidays are grouped in the tree by
their "Shared Holiday Group"
(defined
previously)
;
(DST and xmas; CommonHols2, etc.)
Shared holidays pertain to the same holiday
ID# within each account (from the ID# range
within each 'Shared Holiday Group').
Each group of shared holidays is limited to
the reserved holiday ID# range as was
assigned to each specific group.
(e.g., 1st - 3rd Holiday, 4th - 6th, etc.)
Notes: After initial set up, changes made to a shared
holiday under any individual account will be
automatically copied to other applicable accounts (and
the "Shared Holidays" screen).
If desired, you can even assign groups to accounts 1st
(step 4B), and then define the holidays either here, or at
the applicable holiday ID# in any of the applicable
accounts.
Viewing or Entering These Settings
Select
Shared Holidays
from the MyTools
bar, or select
[Account Folders]
in the tree,
and then 'open'
Shared Groups
, and
Shared
Holidays
(click the "
+
" beside each topic).
Screen Reference
The
Shared Holiday
screen is identical to the
Holiday/Daylight Savings
screen.
Please refer to the "Holiday" administration
topic for details on the provided selections.
Tip: While referring to the 'Holiday' topic, you can
generally ignore screen location references, as they
pertain only when 'in' the Users screen for a specific
account.
Account Folders Shared Groups Shared Holiday