Interlogix VEREX Director - Manual (Page 252)

244 Verex Director V4.9.1 User's Guide 21-0381E v4.9.1
duration you must wait after presenting (and
removing) the card/token each time to be treated as a
double or triple badging.
- Triple badge mode: If selected () this feature
requires a triple-badging, versus only a double-
badging if not selected.
Note: All other fields and available selections are the
same as for badge-hold mode as supported beginning
with Director v4.4.
 Access 
( V4.4)
Access Mode
- Access Control: This identifies that the reader
is to be associated with an access-controlled
door. (Selection to follow).
- Access to Area: This is the area associated
with this reader
(as per the selected door number to
follow/below).
- Type of Reader: This identifies if this reader will
be used as an 'In Reader' or an 'Exit Reader'.
- Door Number: With "Access Control" selected
(previous), this identifies the door that this
reader is to be associated with.
Miscellaneous
- In/Out Station: This applies to a reader being
used to log cardholder arrivals and departures
(e.g., a time-clock application) .
With this feature, the reader will not be associated with
an access-controlled door (so do NOT select "Access
Control" above).