Interlogix VEREX Director - Manual (Page 67)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 59
Introduction
A number of camera controls are provided,
allowing you to:
 Aim or zoom PTZ
cameras;  Check connection status;
 Adjust image quality, etc. These features are
provided through the video toolbar in each
camera-image, with additional camera settings
available under: Tools, Options.
The Video Toolbar
When working in a 'view' that contains a
camera-image, a small button in the bottom-
left corner will provide access to the video
toolbar.
To use this feature, refer to the item-
descriptions for the video toolbar, plus the
sections that follow.
Note: The video toolbar is available when viewing or
customizing maps, but not when setting up 'Views'.
Screen Reference
- Hide Video Toolbar: Closes/hides the video
toolbar;
- Change View Size: Allows setting the
maximum displayed image size for a camera
(details to follow);
- View Messages: Allows viewing the
camera/PTZ connection status for the camera
(details to follow);
- Start PTZ: Allows working with a PTZ camera
(details to follow);
Camera Status/Control and Adjustments
(Show Video Toolbar)