Interlogix VEREX Director - Manual (Page 77)

21-0381E v4.9.1 Welcome Report Control Admin Sys Config Tech-Ref 69
Step 1c: Define Camera-Views
(this is required only for event-triggered
camera-views)
As an alternative to fixed cameras
appearing in different locations on-
screen, camera-views can be thought
of as 'locators' that allow you to set
where specific types of event-
triggered camera images will appear
(separately for each 'view'). Each
camera-view shows the last-triggered
camera associated with it.
Exception: Camera-views close when you
select a different 'view', or move to a
different screen/topic.
Tip: Be sure to create additional camera-
views for cameras that are to appear in
different locations on-screen.
(For more information on this feature, and to
assign a camera-view and camera to each
device, see step 3b.)
Topic Locator:
MyTools Bar: Customize Views,
(login with a user name & ID if needed),
select Camera-Views .
In the Tree: Click your site/account
button in the tree, open Control &
Status, and Panel Control & Status
(click the "+"), and login with your user
ID and PIN if prompted for this. Then,
select: "Visual Director" (click the "+")
 Customize Views,
 Camera-Views.
Multi-Account Systems: First select [Account
Folders] in the 'tree', and double-click the desired
account.
Click [Add] to define a new camera-view, or
right-click an existing one and select Edit
Camera-View . Then, set the name as desired
(see the name description for details).
Screen Reference
Visual Director Customize Views

Camera-Views 
- [Add]: Allows creating a new camera-view.
- [Delete]: Allows deleting an existing camera-view.
After Right-clicking an Existing Camera-View in
the List
- Add New Camera-View: Allows creating a new camera-view
(same as clicking the [Add] button).
- Edit Camera-View: Allows changing the name for a camera-
view that was defined previously.
- Delete Camera-View: Allows deleting an existing camera-
view.
Notice: This will disable the event-triggered camera display feature
for any doors and input points that are using this camera-view.
Visual Director Customize Views Camera-
Views [Add]
(or right-click one in the list and select
"Edit Camera-View")
- Name: Enter a suitable name for the camera-view. This will
pertain to your specific needs and preferences (e.g., Doors,
Motion-Detectors, Sensors in Area X, Button ABC pressed,
etc.).