Avago Technologies MegaRAID Fast Path Software - Manual (Page 98)

Page 98 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Creating a Storage Configuration
— Select Size: Specify the size of the virtual drive in MB, GB, or TB. Usually, this
would be the full size for RAID 10 shown in the Configuration panel on the
right. You can specify a smaller size if you want to create other virtual drives on
the same drive group.
— Update Size: Click Update Size to update the Select size field value for the
selected RAID levels.
18. Click Accept to accept the changes to the virtual drive definition.
If you need to undo the changes, click Reclaim.
19. After you finish defining the virtual drives, click Next.
The Configuration Preview dialog appears, as shown in Figure 51 .
Figure 51: RAID 10 Configuration Preview Dialog
20. Check the information in the Configuration Preview.
21. If the virtual drive configuration is acceptable, click Accept to save the
configuration. Otherwise, click Cancel to end the operation and return to the
WebBIOS main menu, or click Back to return to the previous dialogs and change the
configuration.
22. If you accept the configuration, click Yes at the prompt to save the configuration.
The WebBIOS main menu appears.