Avago Technologies MegaRAID Fast Path Software - Manual (Page 126)

Page 126 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Selecting SafeStore Encryption Services Security
Options
Figure 75: Virtual Drive Properties - Blocked Access
2. Select an access policy from the Access drop down list.
3. Click Change. A confirmation message dialog appears. Click Yes to change the
access policy. The access policy gets changed from Blocked to the policy that you
selected.
4.7 Selecting SafeStore
Encryption Services Security
Options
The SafeStore Encryption Services feature provides the ability to encrypt data and use
disk-based key management for the data security solution. This solution protects your
data in case of theft or loss of physical drives. This section describes how to enable,
change, or disable the drive security settings, and how to import a foreign
configuration.
4.7.1 Enabling the Security Key
Identifier, Security Key, and Password
Perform the following steps to enable the encryption settings for the security key
identifier, security key, and password.
1. Click Drive Security on the main WebBIOS dialog.
The Drive Security dialog appears, as shown in the following figure.