Avago Technologies MegaRAID Fast Path Software - Manual (Page 154)

Page 154 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Viewing and Changing Device Properties
4.8.4.3 Viewing the Physical
Drive Properties of a Drive In
Shield State
Follow these steps to view the physical properties of the drive in Shield state.
1. Click on the Physical view tab or the Logical view tab in the device tree.
2. Click the physical drive that is in shield state on the physical or logical view of device
tree to view the properties.
The device properties of the drive are displayed as shown in Figure 101 .
Figure 101: Physical Drive Properties of a Drive in Shield State
4.8.4.4 Viewing if Shield State is
Enabled in a Controller
Follow these steps to check if the Shield state is enabled in a controller.
1. Click Controller Properties on the WebBIOS main menu.