Avago Technologies MegaRAID Fast Path Software - Manual (Page 304)

Page 304 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 6: MegaRAID Storage Manager Overview and Installation | Prerequisites to Running MegaRAID Storage Man-
ager Remote Administration
Make sure the IP address does not conflict with another in the sub network.
Ports, such as 3071 and 5571, are open and available for the MegaRAID Storage
Manager framework communication.
2. Disable all security manager and firewall.
3. Configure the multicasting.
Make sure Class D multicast IP addresses are registered (at least 229.111.112.12
should be registered for the MegaRAID Storage Manager software to work); if not,
create a static route using the following command:
Route add 229.111.112.12 dev eth1
4. Install the MegaRAID Storage Manager software. If the MegaRAID Storage Manager
software is already installed, restart the MegaRAID Storage Manager Framework.