Avago Technologies MegaRAID Fast Path Software - Manual (Page 284)

Page 284 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 6: MegaRAID Storage Manager Overview and Installation | Installing MegaRAID Storage Manager
8. Select one of the setup options. The options are fully explained in the window text.
— Select the Complete radio button if you are installing the MegaRAID Storage
Manager software on a server.
— Select the Custom Installation radio button if you want to select individual
program components.
9. Click Next to continue.
If you selected Custom Installation as your setup option, the second Setup Type
window appears, as shown in
Figure 168 .
If you selected Complete as your setup option, the Installation wizard is ready to
install the MegaRAID Storage Manager software. To begin installation, click Install
on the next window that appears.
Figure 168: Setup Type Window
10. Select one of the setup options.
— Select the Client radio button if you are installing the MegaRAID Storage
Manager software on a computer that will be used to view and configure servers
over a network. To begin installation, click Install on the next window that
appears.
In the Client mode of installation, the MegaRAID Storage Manager software
installs only client-related components, such as the MegaRAID Storage Manager
GUI, and monitor configurator.
Use this mode when you want to manage and monitor servers remotely. When
you install the MegaRAID Storage Manager software in Client mode on a laptop
or a desktop, you can log in to a specific server by providing the IP address.
— Select the Server radio button to install only those components required for
remote server management. To begin installation, click on Install on the next
window that appears.