Avago Technologies MegaRAID Fast Path Software - Manual (Page 380)

Page 380 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 9: Monitoring Controllers and Its Attached Devices | Changing the Severity Level for Individual Events
NOTE: You can click Restore Defaults to revert back to the default alert delivery
method and the default severity level of an individual event. For more information, see
Rollback to Default Individual Event Configuration .
9.5 Changing the Severity
Level for Individual Events
To change the event severity level for a specific event, perform the following steps:
NOTE: See Table 148 for details about the severity levels.
1. On the Configure Alerts window, click the Alerts Setting tab.
The Alerts Setting portion of the window appears.
2. Click Change Individual Events. The Change Individual Events dialog appears.
The dialog shows the events by their ID number, description, and severity level.
3. Click an event in the list to select it. The current severity appears in the Severity cell
for the selected event.
4. Click the Severity cell for the event. The Event Severity drop-down menu appears
for that event, as shown in the following figure.
Figure 250: Change Individual Events Severity Level Menu
5. Select a different severity level for the event from the menu.
6. Click OK to return to the Configure Alerts window.
7. You may click Cancel to discard your current changes and to go back to the
Configure Alerts window.
8. In the Configure Alerts window, click OK to save all the changes made to the
events.