Avago Technologies MegaRAID Fast Path Software - Manual (Page 217)

LSI Corporation Confidential | July 2011 Page 217
MegaRAID SAS Software User Guide Chapter 5: MegaRAID Command Tool | Product Overview
Chapter 5
NOTE: The CT supports only the MegaRAID controllers that support SAS and SATA II.
It does not support other types of MegaRAID controllers, such as U320, SATA I, or IDE.
NOTE: The IA-64 release for the Windows® operating system is similar to the 32-bit
release, so you can follow the 32-bit instructions. Applications that are 32-bit that were
validated on an x64 system, such as the Intel Market system, can use the 32-bit
instructions, also.
5.1 Product Overview The MegaCLI Configuration Utility is a command line interface application you can use
to manage the MegaRAID SAS RAID controllers. You can use MegaCLI Configuration
Utility to perform the following tasks:
 Configure the MegaRAID SAS RAID controllers and attached devices
 Display information about virtual drives and drives for the controller and other
storage components
 Display ongoing progress for operations on drives and virtual drives
 Change properties for the virtual drives and drives for the controller and other
storage components
 Set, retrieve, and verify controller default settings
 Change the firmware on the controllers
 Monitor the RAID storage systems
 Change power setting (dimmer switch)
 Support RAID levels 0, 1, 5, 6, 10, 50, and 60 (depending on the RAID controller)
 Create and use scripts with the scriptable CLI tool
 Configure drive into groups and virtual drives on the controller
 Display configuration information for the controller, drives, and virtual drives
 Change virtual drive properties on the controller
 Change drive properties on the controller
 Display controller properties
 Load configuration to the controller from a file
 Save the controller configuration to a file
MegaRAID Command Tool
The MegaRAID Command Tool (CT) is a command line interface (CLI) application for
SAS. You can use this utility to configure, monitor, and maintain the MegaRAID SAS
RAID controllers and the devices connected to them.