Avago Technologies MegaRAID Fast Path Software - Manual (Page 325)

LSI Corporation Confidential | July 2011 Page 325
MegaRAID SAS Software User Guide Chapter 7: MegaRAID Storage Manager Window and Menus | MegaRAID Storage Manager Main Menu
Follow these steps to set physical drive properties.
1. In the Physical view, right click the Physical Drive node.
2. Select the Drive Erase option (Alt+E).
The Mode Selection - Drive Erase dialog box appears, as shown in the following
figure.
Figure 193: Mode Selection - Drive Erase Window
3. You can select the various modes available under the Select the mode for Drive
Erase operation.
— Simple – (Alt + S)
When you select this option and click OK, the Drive Erase message box appears,
as shown in the following figure.
Figure 194: Drive Erase Message
— Normal – (Alt + N)
Select this option and click OK. Figure 194 is displayed.
— Thorough – (Alt + T)
Select this option and click OK. Figure 194 is displayed.