Avago Technologies MegaRAID Fast Path Software - Manual (Page 445)

LSI Corporation Confidential | July 2011 Page 445
MegaRAID SAS Software User Guide Chapter 11: Using MegaRAID Advanced Software | CacheCade Advanced Software
Figure 310: Create CacheCade - SSD Caching - Summary
This screen displays the drive group name, the RAID level, the number of drives, the
total capacity, the free capacity, the CacheCade virtual drive name, the capacity being
used, and the write policy.
11. Click Finish.
A confirmation message displays after the CacheCade virtual drive is successfully
created. The CacheCade drive icon appears next to the RAID controller in the left frame
in the MegaRAID Storage Manager window.
11.4.2.1 Modifying the
CacheCade Virtual Drive Properties You can modify the name and the write policy of a CacheCade virtual drive any time
after a CacheCade virtual drive is created. Perform the following steps to change the
virtual drive properties:
1. Right-click on a controller in the device tree in the left frame of the MegaRAID
Storage Manager window and select Set Virtual Drive Properties.
OR
Select a controller and select Go To>>Virtual Drive>>Set Virtual Drive Properties.
The Set Virtual Drive Properties dialog appears, as shown in the following figure.