Avago Technologies MegaRAID Fast Path Software - Manual (Page 137)

LSI Corporation Confidential | July 2011 Page 137
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Selecting SafeStore Encryption Services Security
Options
Figure 87: Change Security Settings – Pass Phrase Dialog
7. To use a pass phrase, click the Use a pass phrase in addition to the security key
check box.
8. Enter a new pass phrase, and enter the new pass phrase again to confirm.
The pass phrase is case-sensitive. It must be between 8 and 32 characters and
contain at least one number, one lowercase letter, one uppercase letter, and one
non-alphanumeric character (e.g., < > @ +). The space character is not permitted.
Non-U.S. keyboard users must be careful not to enter double-byte character set
(DBCS) characters in the Pass Phrase field or Security Key field. The firmware works
only with the ASCII character set.
9. Click Accept. The Authenticate Drive Security Settings dialog ( Figure 88 ) appears in
either of the two scenarios mentioned below.
 If you entered a new pass phrase.
 If you entered a new drive security key.