Avago Technologies MegaRAID Fast Path Software User Manual
Page 193
LSI Corporation Confidential
|
July 2011
Page 193
MegaRAID SAS Software User Guide
Chapter 4: WebBIOS Configuration Utility
|
Non-SED Secure Erase
The Mode Selection- Drive Erase dialog appears.
Figure 140: Mode Selection - Drive Erase
4. Select any of the modes available under the Select the mode for Drive Erase
Operation
— Simple – (Alt + S)
— Normal – (Alt + N)
— Thorough – (Alt + T)
5. Click OK. A confirmation message dialog appears as shown below.
This manual is related to the following products:
- MegaRAID SAS 9240-4i MegaRAID SAS 9240-8i MegaRAID SAS 9260-16i MegaRAID SAS 9260-4i MegaRAID SAS 9260-8i MegaRAID SAS 9261-8i MegaRAID SAS 9280-16i4e MegaRAID SAS 9280-4i4e MegaRAID SAS 9280-8e MegaRAID SafeStore Software MegaRAID SAS 9361-4i MegaRAID SAS 9361-8i MegaRAID SAS 9266-4i MegaRAID SAS 9266-8i MegaRAID SAS 9270-8i MegaRAID SAS 9271-4i MegaRAID SAS 9271-8i MegaRAID SAS 9271-8iCC MegaRAID SAS 9286-8e MegaRAID SAS 9286CV-8e MegaRAID SAS 9286CV-8eCC MegaRAID CacheCade Pro 2.0 Software MegaRAID SAS 9341-4i MegaRAID SAS 9341-8i MegaRAID SAS 9380-8e MegaRAID SAS 9380-4i4e