Avago Technologies MegaRAID Fast Path Software - Manual (Page 89)

LSI Corporation Confidential | July 2011 Page 89
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Creating a Storage Configuration
Figure 45: Span Definition Dialog
12. Under the Array With Free Space frame, select a drive group, and then click Add to
SPAN.
The drive group you select appears in the right frame under Span.
13. Click Add to SPAN.
14. Repeat the previous two steps until you have selected all of the drive groups that
you want.
15. Click Next.
The Virtual Drive Group Definition dialog appears, as shown in Figure 46 . You use
this dialog to select the RAID level, strip size, read policy, and other attributes for the
new virtual drives.