Avago Technologies MegaRAID Fast Path Software - Manual (Page 462)

Page 462 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 11: Using MegaRAID Advanced Software | LSI SafeStore Encryption Services
3. Either use the default security key identifier, or enter a new security key identifier.
NOTE: If you create more than one security key, make sure that you change the security
key identifier. Otherwise, you cannot differentiate between the security keys.
4. Either click Suggest Security Key to have the system create a security key, or you
can enter a new security key.
5. Enter the new security key again to confirm, as shown in the following figure.
CAUTION: If you forget the security key, you will lose access to your data. Be sure
to record your security key information. You might need to enter the security key to
perform certain operations.
The security key is case-sensitive. It must be between 8 and 32 characters and
contain at least one number, one lowercase letter, one uppercase letter, and one
non-alphanumeric character (e.g., < > @ +). The space character is not permitted.
NOTE: Non-U.S. keyboard users must be careful not to enter double-byte character set
(DBCS) characters in the security key field. The firmware works with the ASCII character
set only.
The following figure shows the security key entered and confirmed on this dialog.