Avago Technologies MegaRAID Fast Path Software - Manual (Page 233)

LSI Corporation Confidential | July 2011 Page 233
MegaRAID SAS Software User Guide Chapter 5: MegaRAID Command Tool | Controller Property-Related Options
Table 51: Set Controller Properties
Convention MegaCli –AdpSetProp {CacheFlushInterval –val}|{RebuildRate -val}| {PatrolReadRate
–val}|{BgiRate –val}|{CCRate –val}| {ReconRate –val}| {SpinupDriveCount
–val}|{SpinupDelay –val}|{CoercionMode –val} | {ClusterEnable
–val}|{PredFailPollInterval –val}| {BatWarnDsbl –val}| {EccBucketSize
–val}|{EccBucketLeakRate –val}|{AbortCCOnError –val}|AlarmEnbl | AlarmDsbl |
AlarmSilence |{SMARTCpyBkEnbl –val} |
-AutoDetectBackPlaneDsbl | -CopyBackDsbl | -LoadBalanceMode
| NCQEnbl | NCQDsbl | {SSDSMARTCpyBkEnbl -val} | {MaintainPdFailHistoryEnbl -val} |
{EnblSpinDownUnConfigDrvs -val} | AutoEnhancedImportEnbl | AutoEnhancedImportDsbl |
{-UseFDEOnlyEncrypt -val} | {-PrCorrectUncfgdAreas -val} | -aN| -a0,1,2|-aALL
Description Sets the properties on the selected controllers. The possible settings are:
CacheFlushInterval : Cache flush interval in seconds. Values: 0 to 255.
RebuildRate : Rebuild rate. Values: 0 to 100.
PatrolReadRate : Patrol read rate. Values: 0 to 100.
BgiRate : Background initialization rate. Values: 0 to 100.
CCRate : Consistency check rate. Values: 0 to 100.
ReconRate : Reconstruction rate. Values: 0 to 100.
SpinupDriveCount : Maximum number of drives to spin up at one time. Values: 0 to 255.
SpinupDelay : Number of seconds to delay among spinup groups. Values: 0 to 255.
CoercionMode : Drive capacity Coercion mode. Values: 0 - None, 1 - 128 MB, 2 - 1 GB.
ClusterEnable : Cluster is enabled or disabled. Values: 0 - Disabled, 1 - Enabled.
PredFailPollInterval : Number of seconds between predicted fail polls. Values: 0 to 65535.
BatWarnDsbl : Disable warnings for missing battery or missing hardware. Values: 0 - Enabled, 1 - Disabled.
EccBucketSize : Size of ECC single-bit-error bucket. Values: 0 to 255.
EccBucketLeakRate : Leak rate (in minutes) of ECC single-bit-error bucket. Values: 0 to 65535.
AbortCCOnError : If firmware detects inconsistency, then CC is aborted.
AlarmEnbl : Set alarm to enabled.
AlarmDsbl : Set alarm to disabled.
AlarmSilence : Silence an active alarm.
SMARTCpyBkEnbl : Enable copyback operation on SMART errors. Copyback is initiated when the first SMART error occurs on
a drive that is part of a virtual drive.
AutoDetectBackPlaneDsbl : Detect automatically if the backplane has been disabled.
CopyBackDsbl : Disable or enable the copyback operation.
LoadBalanceMode : Disable or enable the load balancing mode.
NCQEnbl : Enable the native command queueing.
NCQDsbl : Disable the native command queueing.
SSDSMARTCpyBkEnbl : Enable copyback operation on Self-Monitoring Analysis and Reporting Technology (SMART) errors
on a CacheCade software. Copyback is initiated when the first SMART error occurs on a SSD that is part of a virtual drive.
MaintainPdFailHistoryEnbl : Enable maintenance of the history of a failed drive.
EnblSpinDownUnConfigDrvs : Enable spindown of unconfigured drives.
AutoEnhancedImportEnbl : Enable the automatic enhanced import of foreign drives.
AutoEnhancedImportDsbl : Disable the automatic enhanced import of foreign drives.
UseFDEOnlyEncrypt : Use encryption on FDE drives only.
PrCorrectUncfgdAreas :