Avago Technologies MegaRAID Fast Path Software - Manual (Page 455)

LSI Corporation Confidential | July 2011 Page 455
MegaRAID SAS Software User Guide Chapter 11: Using MegaRAID Advanced Software | LSI SafeStore Encryption Services
11.6.3 Change Security Settings- LKM When you select the Change Security Settings option in the Change Security wizard
as shown in
Figure 322 , two options are provided for you. If you select the first option,
Change current security settings, you can change the drive security settings on the
controller. If you select the second option, Switch to External Key Management
(EKM) mode, you can switch from LKM mode to EKM mode.
Perform the following steps to configure the Change Security Settings wizard.
1. Select the Physical tab in the left panel of the MegaRAID Storage Manager window,
and select a controller icon.
2. Choose any one of the following options to enable the Change Security Settings
wizard.
 Select Go To >> Controller >> Change Security Settings in the main navigation
bar present in the top portion of the MegaRAID Storage Manager dialog.
 Right-click the controller icon, and click Change Security Settings.
The Change Security Settings wizard appears as shown in the following figure.
Figure 322: Change Security Settings Dialog
3. Select the Change current security settings radio button, if you want to change
the drive security settings on the controller using the LKM mode.
When you select this option, the details of the change current security settings
given in
Section 11.6.10, Changing the Drive Security Settings is displayed.
4. Select the Switch to External key management (EKM) mode radio button, if you
want to switch over from LKM mode to EKM mode.
5. Click OK.
After you click OK, the Authentication Drive Security Key dialog appears.
11.6.3.1 Authentication Drive
Security Key In the Authentication Drive Security Key dialog, enter the current LKM authentication
drive security key in the Current Security Key field.