Avago Technologies MegaRAID Fast Path Software - Manual (Page 366)

Page 366 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 8: Configuration | Changing a Virtual Drive Configuration
Figure 237: Modify Drive Group – Add Drives to the Current Configuration Window
5. Click the check box next to any unconfigured drives that you want to add, and then
click Next.
NOTE: The drives you add must have the same capacity as or greater capacity than the
drives already in the drive group, or you cannot change the RAID level.
The Modify Drive Group – Summary window appears. This window shows the
current settings and what the settings will be after the drives are added.
Figure 238: Modify Drive Group – Summary Window