Avago Technologies MegaRAID Fast Path Software - Manual (Page 459)

LSI Corporation Confidential | July 2011 Page 459
MegaRAID SAS Software User Guide Chapter 11: Using MegaRAID Advanced Software | LSI SafeStore Encryption Services
2. Choose any one of the following options to enable the Scan Foreign Configuration
wizard.
— Right-click the controller node in the device tree in the left frame of the
MegaRAID Storage Manager window, and select Scan Foreign Configuration.
— Select Go To >> Controller >> Scan Foreign Configuration in the main
navigation bar present in the top portion of the MegaRAID Storage Manager
window.
If a foreign configuration is detected, the “Foreign Configuration Detected” dialog
appears. If you select Import and click OK, the Unlock Foreign Drives wizard
appears, as shown in
Figure 331 .
11.6.6 Importing Foreign Drives to
LKM
When the virtual drive is secured with the EKM mode, and if you change the security
settings from the EKM mode to LKM mode, and want to import those foreign
configured virtual drives, the following dialog appears.
Figure 330: Importing Foreign Drives- EKM to LKM
11.6.7 Importing Foreign Drives to
EKM
When the virtual drive is secured with the LKM mode, and you want to switch from LKM
to EKM, and if the virtual drive is in Foreign state, and if you want to import those
foreign configuration, you must provide the LKM key for each virtual drive.