Avago Technologies MegaRAID Fast Path Software - Manual (Page 472)

Page 472 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 11: Using MegaRAID Advanced Software | Managing Link Speed
2. Select the desired link speed from the Select Link Speed field using the drop-down
selector.
The link speed values are Auto,1.5, 3.0 or 6.0 Gbps.
NOTE: By default, the link speed in the controller is Auto or the value last saved by the
user.
3. Click OK.
The link speed value is now reset. The change takes place after you restart the
system.
The message box appears, as shown in the following figure.
Figure 340: System Restart Required Message