Avago Technologies MegaRAID Fast Path Software - Manual (Page 276)

Page 276 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 5: MegaRAID Command Tool | Miscellaneous Commands
5.23.2 Stopping Performance Data
Collection
Use this command if the performance data collection is already running and you want
to stop the collection of performance data.
5.23.3 Saving Performance Data Use this command to save the performance data collection in a file.
5.24 Miscellaneous
Commands
The commands in this section are used to display various information.
5.24.1 Display the Version Use this command to display the CLI version, the version of the device driver, the
version of the Unified extended firmware interface (UEFI) device driver, the firmware
versions for the attached physical device, and the enclosure.
5.24.2 Display the MegaCLI Version Use the command in the following table to display the version number of the MegaCLI
utility.
Table 143: Stopping Performance Data Collection
Convention MegaCli -perfmon -stop -aN
Description -perfmon: Specifies collection of performance data.
The possible parameters are:
-stop: Stops the performance data collection.
Table 144: Saving Performance Data
Convention MegaCli -perfmon -getresults -f -aN
Description -perfmon: Specifies collection of performance data.
The possible parameters are:
-getresults: Specifies saving the performance data collection.
-f: Specifies the file name in which the performance data is to be saved.
The format of the file is CSV.
Convention MegaCli -Version -Cli | Ctrl | Driver | Pd | Uefi aN
(Uefi works only for EFI)
Description Displays the firmware versions and other code levels installed on the
controller, the CLI version, the version of the device driver, the version of the
UEFI device driver, the firmware versions for the attached physical device,
and enclosure in a list as location information, model string, and the
firmware version.
Table 145: Display MegaCLI Version
Convention MegaCli –v
Description Displays the version number of the MegaCLI utility.