Avago Technologies MegaRAID Fast Path Software - Manual (Page 66)

Page 66 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Creating a Storage Configuration
4.5 Creating a Storage
Configuration
This section explains how to use the WebBIOS configuration utility Configuration
Wizard to configure RAID drive groups and virtual drives to create storage
configurations:
Follow these steps to start the Configuration wizard, and select a configuration option
and mode:
1. Click Configuration Wizard on the WebBIOS main dialog.
The first Configuration Wizard dialog appears, as shown in the following figure.
Figure 29: WebBIOS Configuration Wizard Dialog
2. Select a configuration option.
CAUTION: If you choose the first or second option, all existing data in the configuration
will be deleted. Make a backup of any data that you want to keep before you choose an
option.
— Clear Configuration: Clears the existing configuration.
— New Configuration: Clears the existing configuration and lets you create a new
configuration.
— Add Configuration: Retains the existing storage configuration and adds new
drives to it (this option does not cause any data loss).
3. Click Next.
A dialog box warns that you will lose data if you select Clear Configuration or New
Configuration.