Avago Technologies MegaRAID Fast Path Software - Manual (Page 290)

Page 290 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 6: MegaRAID Storage Manager Overview and Installation | Installing MegaRAID Storage Manager
On a 64-bit operating system, the system libraries are present in the /usr/lib64 directory
by default. However, for supporting CIM Plug-in, make sure that the libraries are also
present in /usr/lib by installing the appropriate RPMs.
6.4.10 MegaRAID Storage Manager
Customization
You can customize your Logo and Splash window by editing the msm.properties
file present in the Manager>
folder.
The msm.properties file has no values for the following keys:
a. CHANNELLOGO=
b. CHANNELSPLASHSCREEN=
No default values are assigned for these keys; therefore, the MegaRAID Storage
Manager uses the default LSI Logo and splash screen.
To customize the Logo and splash screen, enter the Logo and Splash screen file name
against these entries.
To enter the file names follow these steps:
1. Open the msm.properties file in the
<installation-directory\MegaRAID Storage Manager> folder.
2. Enter the value for the logo file against the key CHANNELLOGO.
3. Enter the value for the splash screen file against the key CHANNELSPLASHSCREEN.
4. Save the file.
5. Place these two images in the MegaRAID Storage
Manager > folder.
6. Start the application.
Following are some of important points that you need to keep in mind:
 File names for both entries should not have any spaces. For example, the valid file
name would be: logo_test_1.png, LogoTest1.png, or
TEST_SPLASH_FILE.jpg.
 The logo image dimensions should not exceed 160 pixcels x 85 pixcels (width x
height).
 The splash screen image dimensions should not exceed 390 pixcels x 260 pixcels
(width x height).
After making the changes mentioned previously, when you log into the MegaRAID
Storage Managers software, you will be able to view the changes with the new splash
screen and logo in the MegaRAID Storage Manager software.