Avago Technologies MegaRAID Fast Path Software - Manual (Page 173)

LSI Corporation Confidential | July 2011 Page 173
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Suspending and Resuming Virtual Drive Opera-
tions
2. Select the Expand radio button, and click Go.
The WebBIOS Config Utility Expand Virtual Drive dialog appears, as shown in
Figure 121 .
Figure 121: Expand Virtual Drive Dialog
3. Enter the percentage of the available capacity that you want the virtual drive to use.
For example, if there are 100 GB of capacity available and you want to increase the
size of the virtual drive by 30 GB, select 30 percent.
4. Click Calculate to determine the capacity of the virtual drive after expansion.
5. Click Ok.
The virtual drive expands by the selected percentage of the available capacity.
4.10 Suspending and
Resuming Virtual Drive
Operations
MegaRAID provides background Suspend and Resume features that enhances the
functionality. The background operations on a virtual drive can be suspended using
the Suspend option, and later resumed using the Resume option. The suspended
operation resumes from the point where the operation was suspended.
If any operation is stopped before completion, it is considered to be aborted. An
aborted operation cannot be resumed from the place is was stopped.
NOTE: Suspend and resume are applicable for all the background operations, such as
background initialization, rebuild and consistency check notes.