Avago Technologies MegaRAID Fast Path Software - Manual (Page 86)

Page 86 LSI Corporation Confidential | July 2011
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Creating a Storage Configuration
— Select Size: Specify the size of the virtual drive in MB, GB, or TB. Usually, this
would be the full size for RAID 6 shown in the Configuration panel on the right.
You can specify a smaller size if you want to create other virtual drives on the
same drive group.
— Update Size: Click Update Size to update the Select size field value for the
selected RAID levels
9. Click Accept to accept the changes to the virtual drive definition.
If you need to undo the changes, click Reclaim.
10. Click Next after you finish defining the virtual drives.
The Configuration Preview dialog appears, as shown in Figure 43 .
Figure 43: RAID 6 Configuration Preview Dialog
11. Check the information in the configuration preview dialog.
12. If the virtual drive configuration is acceptable, click Accept to save the
configuration. Otherwise, click Back to return to the previous dialogs and change
the configuration.
13. If you accept the configuration, click Yes at the prompt to save the configuration.
The WebBIOS main menu appears.