Metrohm tiamo 1.0 Manual - Manual (Page 89)

Manual control 65
Dosing
Manual dosing can be started and stopped here. This tab only appears if a single
dosing device has been selected; it does not appear for Titrino-type dosing de-
vices.
Note
Manual dosing for Titrinos is only possible via the device keypad.
Dosing rate
[ maximum ]
0.01 ... 166.00 mL/min
(Titrando, 814, 815)
0.01 ... 160.00 mL/min (778, 789)
Speed at which dosing is to be carried out. The maximum dosing speed
depends on the cylinder volume of the Exchange unit or Dosing unit used.
If the entered dosing rate is too high for the selected dosing device then
during dosing it will automatically be reduced to the largest possible value.
Note
The dosing rate should be reduced for viscous liquids.
Filling rate
[ maximum ]
0.01 ... 166.00 mL/min
(Titrando, 814, 815)
0.01 ... 160.00 mL/min (778, 789)
After dosing the buret will be refilled at this speed. The maximum filling
speed depends on the cylinder volume of the Exchange unit or Dosing unit
used. If the entered filling rate is too high for the selected dosing device
then during filling it will automatically be reduced to the largest possible
value.